Hi Folks, I have a 2018 SDX 270 with a Simrad NSS12 EVO3. I have to constantly run very shallow winding and unmarked stretches to get to and from my lift. I’m thinking about adding Simrad Forward Scan and was hoping someone might have experience or o...
We have swim platform made by swimplatform.com. It extends back 34" and it dips too low in the water when coming off plane. As a result, we get prop wash over it and even into the rear deck area. Swimplatforms.com. would want to custom build a sh...
I have an accessory switch installed at the helm which is wired up for the hydraulic swim platform option aft at the transom (switch connection installed at the fuse block under the helm), only the option itself was not installed. With the wiring in ...
In the past Sea Ray’s customer support has been fantastic. I have a 2008 Sundancer 38 and have alway been able to call and get a part number so I could order a replacement. Yesterday I called Sea Ray’s customer support number at (386) 439-3401 and t...
I'm a pretty crappy boat parker (always worried about hitting another boat) and am thinking about adding a bow thruster and joystick to my 2015 SDX 270. Any advice?? Thanks
Hello, I have just purchased a used 2021 Sea Ray 310 SLX. It came with the quick release fender receivers already installed on the boat but it didn't come with the actual clips themselves. I went online and looked for them and I saw a couple options...
Hi Guys,I have a Sea Ray 220 SSE 2007 and have problems with bimini rear stanches that are fully stuck because of oxidation. I have tried to put rust remover without success. Also one of the top main bows is broken.Part numbers are: 1816126 CANVAS, 2...
What are the ideas or reviews on the foam type deck covering like dekit , does it fade wear life etc thanks
Hi, I'm in the process of purchasing a 40MY 2007. I've looked around the boat, and the internet. My question is how are people installing accessories like dinghy davits to the swim platform? The platform seems built like a pontoon or bustle, unlike ...
I am new to this forum I know I have seen info about the custom wood floors but cannot find it any help would be appreciated I promise I will get better
