Just purchased a 2019 350 Coupe. It has the Captain's chair that swivels. Unfortunately the chair does not lock in place. Looking for info to determine if this is a DIY fix or not. Also the vents/grilles/covers at the base of the windshield (defrosti...
I am a seadek supplier & installer who has been sitting on a kit for a couple years now and am looking to sell it for a substantial discount. The customer changed his mind on which shade of brown he wanted & I didn't have the ability to return it.23 ...
Recently I did something dumb. I forgot to unhook my shore power. When I returned to my boat slip the yellow electrical cord was in the water. I shook it out and dried it out with a low temp heat gun. Before I hooked up the shore power I used dia...
Has anyone sourced a replacement for the small LED light located at the top of the breaker panel in the salon? (on our 2006 Sundancer 320). Also, is the switch for the cabin courtesy lights supposed to turn that one on? TIA
I just purchased a 1994 Sundancer 300 and the accessory breaker keeps popping out on the cockpit panel. What systems are powered by the Accessor rocker switch?
Hey everyone,my name is Chris and i am from Austria. I would like to install 2 underwater lights. Did you know if the cables from the helm to the back is already installed?there is also a fuse with cables but i don't know where to find the cables in ...
Hi all, I recently bought a 2005 260 Sundancer that has a lot of play in the steering wheel. I can rotate the wheel about 30° before the steering cable starts to move. It appears that the rack on the end of the steering cable and the pinion at the ...
Does anyone knows how to operate diesel cross feed valves between the engines. There are three valves one for PORT one for STBR and one in the middle. There is motor under the valves but we cannot find where the switch is located. On the dash there ...
Need a starboard side windshield for a 2012 Sundancer 28. Any help would be greatly appreiciated.
hello all,I recently installed 3 underwater lights and trying to hook into starboard helm pad ACC1. That pad is a sealed pad so hooking into can not happen. There is a 4 prong wire from pad down to another connection and then from there it goes to a ...
