Anchor light

[Lucy_Belle]

Recently purchased a 2015 19SPX.  I've noticed that my anchor light will not work when the Anchor Light toggle switch is flipped on.  However, when I flip on the NAV Lights switch, the anchor (or all-round light) along with the port/starboard combo light all function properly.

All wiring seems to be connected behind the panel.  Any where else I should check?

[GoVolGal]

Lucy Belle, you need to determine if you are getting power at the light with just the anchor light switch on.  My guess is you aren't.  Next you need to determine if you are getting power to the switch.  If you aren't, then you have a wiring issue.  If you are then it sounds like a bad switch.  This is from a do it yourselfer.
 

Go Vol Gal