2008 250 SLX
Can anyone help me please ,to locate a wiring diagram fro the Vacu flush system on my boat . The vacum pump has stopped working and no indication on the switch panel in the toilet. Thank you .
Conversations
Help tracking down leak
Hello.I have a 2017 Sundancer 400. For the entire summer I have been trying to track down the source of a leak. The water comes in the aft stateroom, there is a closet that contains the vacuum, if I remove the vacuum and look up and aft slightly, I...
Sea Ray 320 2024 - Mercury VesselView with iOS
We seem to be having trouble to get the Mercury VesselView to sync up with an Apple iOS device. I have the VesselView app installed but it can't find the device. We have tried several times with the engine running. This is a Sea Ray 320 2024 model...
Resolved! Weird alarm and engine stall
I am getting an occasional brief alarm and very brief stall in my 8.1 l Mercruiser (2007 Sundancer 280, 420 hours). This happens both at the dock and at slow speeds. Before and after, all is running well. In addition, I have had a single occasion whe...
Mercruiser 6.2 350HP Bravo 3 which propellers?
I have a Sunsport 250 with the above z-drive. My bravo 3 propellers are 21 inch pitch. I saw the same boat the other day with the same motor and boat specification, but with 22.5 inch pitch propellers.My question is - which of the two specs is the id...
Searay 410 seacock for macerator discharge
Just boat this 2000 Searay 410. Is there a seacock for the macerator overboard discharge or is it just the button on the panel?
Resolved! Cat 3116 sync problem.
I am crossing lake Ontario and my boat sync started to randomly go toward rhe port side but the rpm's don't change. The sound does !https://youtu.be/5JZGCpS9nUc?si=5hHmABClqAlFfGjF Any ideas ?
Alarm going off after 10 mins on1988 Sea Ray with 135 Mercury
We have a 1988 Sea Ray with a Sea Ray (Mercury S/N B278442)) 135 hp. After running for 5-10 minutes we get the steady alarm which I believe is indicating that it is overheating. The water temperature coming out is about 155° and the temp guage is rea...
Looking for GPS/Chart Plotter mounting locations
We recently purchased a Garmin ECHOMAP UHD2 94SV for our 2021 SPX 190. We prefer NOT drilling the gelcoat. Made a call to RAM Mounts figuring they could suggest a suction cup mount for a twin cup mount but they said they didn't trust mounting it t...
Hatch Riser Arm For 20"X20" Hatch (Windshield Accessories) by Taylor Made (1722)
Lost both arms that were custom-made by Taylor Made for 1990- 2012 (?) SR's. On my 2008 340 DA, the hatch (over the V-berth) is a trapezoid shape and the latches to dog the hatch closed is connected to the hatch arms through the glass (in other words...
