I need to remove the corner starboard...

[GLM]

I need to remove the corner starboard seat in a 2000 46 Sundancer aft cabin. Does anyone have a diagram of how to remove it? 

[wingless]

Welcome to the forum.

All of the cockpit cushions in my 2000 380DA have coated marine plywood bases retained to the boat w/ screws through the fiberglass / gel coat attached from the back side.

Maybe that cushion on your boat is attached using the same method.

[GLM]

Thanks. It’s on the interior curved corner seat and there’s some screws through the the cushion seam areas. you can’t get underneath it. I think you have to remove the whole corner assembly.

[wingless]

Here is that cushion.

https://images.boatsgroup.com/resize/1/11/46/7571146_20200828075436666_1_XLARGE.jpg

Does yours have speakers / sub woofers that could be removed to gain access?

https://images.boatsgroup.com/resize/1/81/74/8148174_20211202041114942_1_XLARGE.jpg

[GLM]

Aft cabin corner seat is what I need to remove to get to the sanitation hose to replace

[wingless]

Thanks for the image.

Is it currently known how to remove any of that seating? If so, can an image please be provided at maximum disassembly?

Is that sofa motorized to become a bed? If so, can images please be provided at mid motion and at full deployment?

[GLM]

I have removed the back of the motorized sofa - just 4 scews. I have removed several screws from the corner cushions. I’m not currently near the boat for pics. Thanks for the reply. More ro come

[wingless]

This topic shows the removal / replacement of my motorized sofa. Maybe this will help.

https://www.cruisersforum.com/forums/f115/wingless-2000-sea-ray-380-sundancer-water-heater-access-227576.html

[GLM]

Thanks

[GLM]

I was able to obtain access under the starboard aft cabin corner seat by cutting out a piece of the lower edge of the vertical support. I removed the carpet and vinyl cover and will replace when remounting the piece removed. It will be cosmetically unnoticeable.