Sea Ray

Buzz1 · ‎01-09-2022

Need to refasten 2 stantions on my 33 Sundancer starboard rail at mid ship any suggestions on how to get to bolts underneath. Or is their a product that can be used from above that will hold them solid.

Charlie51 · ‎01-11-2022

I have the same problem on a 40 Sundancer

wingless · ‎01-13-2022

All of the rail stanchion bolts on my 2000 380DA may be accessed by disassembly of the interior.

Note that in many places the interior disassembly is a very involved process.

Buzz1 · ‎01-13-2022

I figured it wouldn't be easy

Brite_Idea · ‎01-16-2022

I'm not sure how hard they'll be to get to but it's doable. I helped a friend do his 1989 270 Sundancer and together he was up on deck and I worked inside we unbolted, removed and re-bedded all the deck hardware which cured most of his leaks. Go slow maybe you can drill some access holes out of sight?

gtstang462002 · ‎01-16-2022

Definitely recommend rebidding them if you are going through all the trouble to gain access just to tighten them up. There is a good chance that the sealant is compromised already since the bolts are loosened up.

Buzz1 · ‎01-16-2022

Yes planning on doing that hopefully I can make access holes out of site...Thanks

wingless · ‎01-16-2022

Access holes are not required.

Just disassemble the interior to permit access, like when the boat was built.

Buzz1 · ‎01-16-2022

Hopefully I can just remove stereo cabinet to access boat under shrinkwrap for winter just getting game plan... thank's

Charlie51 · ‎01-16-2022

In my case I would have to remove the whole port side cabinet and wet bar. I think I'll be drilling from underneath.

Sea Ray

Need to refasten 2 stantions on...