Sea Ray

Excellent job on the schematics. Somewhere SR must have a schematic like this for my boat. The simple one in the manual that I have doesn't show the E120 and associated electronics at all. It just has the vesselview schematic. So far I am trouble shooting the output of the vesselview through the NMEA multiplexer then into the E120. The issue is that the problem could be in any of those 3 units or the wiring. Thanks for the help.

The factory wiring for my electronics was horrible, I yanked it all out when it was two years old and sold everything. It would be a total shock if Sea Ray had wiring diagrams they could provide for the electronics.

The Raymarine site has EXCELLENT documentation on their products.

A pad and paper to make your own wiring diagrams is better than nothing.

My boat now has MANY pages of supplemental documentation that I created, for my modifications and for the lacking factory documentation.

IMO, complete and accurate wiring diagrams falls into the essential category.

Thanks for the comments and I agree, so what does a mechanic at Marinemax use to trouble shoot? If they don't have better documentation than I have and my nearest dealer is 100 miles away, I'm better off trying to fix it myself. Raymarine does have excellent documentation, they just stop at the NMEA bus. I would have local Raymarine and Mercruiser (vesselview) mechanics look at it but they probably would point fingers at each others box. Sorry, just venting. Thanks again for the help and comments, looks like another winter time job to create a good set of diagrams.

I did resolve this issue so just to let anyone else know. Somehow (don't know if it was me or one of my helpful friends) there is a setting under the system settings on the Raymarine where you can change what protocol the input receives. Somehow mine got changed from NMEA to AIS. Once I changed it back, I got my depth back on the Raymarine. Not quite sure why the technician didn't bring that up when I contacted them on my problem at
Raymarine?

Sea Ray provides extensive schematics for all interfaces and build documents. Attached is the E120, dual station installation with interfaces. You should consider contacting SR CSR at 865 540-2057. I have over 800 sets of schematics for my 47DB. Just have to ask Sea Ray. As far as ripping out the OEM installation - that's a really dumb idea unless the boat is ancient and/or have had too many "experts" on board to fix or install stuff.

Thanks for the suggestions.

My 2000 380DA was 1-1/2 years old when I purchased it from the original owner.

The only hands that could have / would have touched the very poorly implemented original electronics installation was either the factory or the local Marine Max dealer. It was amateur at-best. It was night and day quality compared to the rest of the factory wiring.

When I bought the boat I contacted Sea Ray and requested the full documentation package. I was mailed 1" thick of prints for my boat, including every bit of factory wiring.

The package sent from Sea Ray for my 2000 380DA did not include anything on any of the helm electronics, including the originally-installed Raytheon RL80 plotter radar. They did not include the Dual E120 for the 2010 500DB that was just posted.

Please post the factory electronics diagram for my 2000 380DA.

My installation exceeds the quality and standards of any factory or aftermarket installation, including the professional schematics for all the equipment I've installed, so I'm struggling to find the dumb here...


http://i101.photobucket.com/albums/m52/wingless-pics/Boat/380DANewElectronicsWiringDiagram800.jpg

Sir..My comments were meant to answer cbruck's questions. Obviously your electronics install was done via a local dealer/installer and not at the SR factory. As an ISO certified facility Sea Ray does an outstanding job of industry standard manufacturing and CE certified installations. Most owners do not have the capabilities to "rip out" factory installed infrastructures nor the financial resources needed. You obviously are in the business so that's great. Like I advised cbruck's- owners can contact Sea Ray CSR to obtain PDFs of schematics and mechanical builds on most recent models that fall under ISO and CE certifications. However, Owners need to be specific on what they are asking SR to provide.

How do I get a copy of those schematics for my 2003 340 SDA? Thx

Contact SR CSR at the number I posted above. You need to be specific on what you ask them for.

Sorry, Captain Rick, I do not see that number for SR CSR

CSR 865 540-2057

Thank you

Thanks for the number Capt Rick. For anyone reading this post, I did solve the problem. There is a software setting in the E120 that lets you set what interface it is connected to. You have a choice of 4 different interfaces and of course (somehow-more than likely someone playing with my E120) mine was set to another interface and not NMEA. Now my E120 reads depth etc like it used to. When I contacted Raymarine, they did help me determine that the E120 was not receiving the NMEA data but they never told me there was a setting that has to be set to NMEA in order to receive NMEA data. It would have saved me countless hours.