Community Connection
Advice and support from fellow boaters
cancel
Showing results for 
Search instead for 
Did you mean: 

Conversations

Forward bilge alarm

Howdy folks... I have a 1-year old 310SLX and loving it.  But I'm not getting straight answers from the dealer regarding an annoying alarm that kicks in almost every time we go out.  I assume rain is getting into the forward bilges (under the mid-boa...

Power steering problem

 I have a 2019 sea ray 230 box with Merc  200. Only have 100 hours on the boat. I was trying to change the depth gauge but couldn’t figure out what I was doing. Then there was an alarm from the dash, the boat slowed down and the power steering stoppe...

Lp by Guest Contributor
  • 450 Views
  • 0 replies
  • 0 likes

2005, 300 Sundancer Cracked Stair Weld

HelloHas anyone had any experience taking out a staircase in a 2005 , 300 sundancer i have a bottom weld broken and I have to remove the stairs to have it welded any help would be greatly appreciated.The buttom flange is easy the top however i am not...

Smytty by Guest Contributor
  • 730 Views
  • 0 replies
  • 0 likes

2007 SLX 250

I have a 2007 SLX 250 with an 8.1 L V 8 Mag 496 engine  that will not rev above 3500 rpm. It appears to backfire with a loss of power if I open the throttle above this figure ; especially when putting the engine under load. Iv'e spent thousands of Eu...

JJ_s by Guest Contributor
  • 694 Views
  • 0 replies
  • 0 likes

Rubberpad

Pls help.My 9 contact in rubberswhich is not funktion.Can anyone help with info on the 6 wires it is connected to.Mogens 

Navigating SeaRay for Help

Hi all - I am an owner (since new) of a 2019 SDX250.  It has been plagued by problems from the start - many caused by the dealer, others just lingering build issues.  I want to love my boat, but am challenged to feel that way given the continuous iss...

greg7 by Guest Contributor
  • 2270 Views
  • 5 replies
  • 1 likes

Steering Angle Sensor error

I have a 2007 Sundancer 280 and occasionally I’m getting a “Steering Angle Sensor is not working property”. What’s the problem? Is it major? How do I fix it? Is it an easy fix?ThanksDavid 

DavidF1 by Guest Contributor
  • 892 Views
  • 0 replies
  • 0 likes

SDX 250 300 Verado Outboard

So I am looking at purchasing this boat. From what I can tell it does not have a ski pylon, nor is one offered by Sea Ray. It appears every other outboard model they make has this option. There is a mounting hole in front of the outboard in the floor...

petdoc87 by Guest Contributor
  • 1536 Views
  • 3 replies
  • 0 likes

Canvas support frame specs for 1993 Sundancer 300

I received a boat that doesn't have any poles for the enclosure or bimini. etc.. I cannot find spec information anywhere on this and now I'm here asking for help. The canvas is OEM so it would fit the origina polel setup. Please help !!

Dema by Guest Contributor
  • 452 Views
  • 0 replies
  • 0 likes
Labels