Community Connection
Advice and support from fellow boaters
cancel
Showing results for 
Search instead for 
Did you mean: 

Conversations

1981 SRV245 Sundancer

Looking for anchor hatch schematics or the hatch it's self for my 1981 SRV245 Sundancer. Does anyone have a source or can help me out. Thanks!

mrwallfish by Guest Contributor
  • 413 Views
  • 0 replies
  • 0 likes

Resolved! 2018 SLX 280 Trim tab indicator

I have a 2018 SLX 280 that is new to me this season. Been great so far and I'm getting more and more comfortable with the huge amount of features that it has coming from a 2004 220 SD. This boat has the Dynamic Display (touch screen) so essentially a...

lakebum431 by Guest Contributor
  • 1464 Views
  • 4 replies
  • 0 likes

2005, 220 select smart craft

My sc alarm sounds with fault low oil pressure sensor when at about 2500+RPM. Doesn't do it at low RPM, and the analog gauge shows no issue, and boat runs fine at all RPMs. Where is this sensor, and anybody know the model # for correct replacement. T...

pirate220 by Guest Contributor
  • 1430 Views
  • 2 replies
  • 0 likes

No power to accessories

Where is the main breaker panel on a sea ray 270 sdx with 8.2 IO. I have no power to the helm. Thanks in advance. No power to any accessories. Boat starts. Windless works. No lights work.

fire4161 by Guest Contributor
  • 767 Views
  • 0 replies
  • 0 likes

Exhaust port -

I have a 2001 Sundancer 460 and recently discovered that my starboard underwater exhaust port is missing.  I've been told that these have a tendency to shear off due to the design which is bulky and seems to invite trouble (from objects in the water)...

Pickleball by Guest Contributor
  • 853 Views
  • 0 replies
  • 0 likes

1976 Sea Ray srv 200

Afternoon all, I am looking for any information in regard to adjusting the shift cable on an omc Stringer to allow the boat to start in neutral. Any direction towards a manual will be greatly appreciated. The manual I have talks about the shift needl...

Alangmay by Guest Contributor
  • 648 Views
  • 0 replies
  • 0 likes

Depth finder transducer

I have a 2008 195 sport and It has a faulty depth finder.  Readings are all over the map. My question is how do I test the transducer and where is it?Dan

danp1 by Guest Contributor
  • 705 Views
  • 0 replies
  • 0 likes

backlight strip on sundancer 340 2001

Hi everyone, I'm having trouble getting a new backlighting strip to work.. the old strip had 4 wires  and the new unit that i bought from fpmarine has a transducer with 2 wires. How do connect these (2) wires? Any help would be appreciated.

annie1 by Guest Contributor
  • 783 Views
  • 0 replies
  • 0 likes
Labels