Legacy Models
Pre-2000 Models
cancel
Showing results for 
Search instead for 
Did you mean: 

Conversations

360 Helm Seat

Can anyone confirm on a 2003 to 2006 that the helm seat rotates 90Degrees to form a chaise lounger with the double helm campion bench?

Devocean by Guest Contributor
  • 119 Views
  • 0 replies
  • 0 likes

1984 Searay Monaco 207 - Need remote control

Good evening,I’m interested in replacing the original Quicksilver side mount control with trim feature. The throttle only button has failed and a repair of the original does not look like a long term solution. If anyone could advise on an appropriate...

Jbraeger by Guest Contributor
  • 91 Views
  • 0 replies
  • 0 likes

Wiring colour code

As I continue my rewiring project, I'm down to four (original) wires in a Sea Ray harness, all four of unknown purpose.All enter the harness and then disappear into the hull, going .. who knows where.   They areBlue with white stripe Green with white...

alan-bc by Guest Contributor
  • 863 Views
  • 2 replies
  • 0 likes

What's a Step Dn Pump?

I'm redoing the wiring on my old SeaRay, pretty much top to bottom.  The original wiring was only so-so, age and salt air has certainly taken a toll and the numerous "improvements" by previous owners are comical at best.Step 1 is tracking down every ...

alan-bc by Guest Contributor
  • 671 Views
  • 0 replies
  • 0 likes

1988 SeaRay Bowrider

I have a 1988 SeaRay Bowrider with a 100hp Johnson 2-stroke, and I am having issues with the throttle/shifter not getting to max speed/RPM and the Idle lever being so lose as to be useless.  How do I adjust, or even what can I buy noew to replace thi...

1989 18’ bowrider alarms

I have a 1989 bowrider with a 135 Mercury 2 stroke outboard.  I am having some issues with alarms.  When I took it out the first time there was a long consistent alarm.  We messed with the oil reservoir connection and that seemed to eliminate it that...

Tsiebel by Guest Contributor
  • 728 Views
  • 0 replies
  • 0 likes

Smart Craft alarm

Just bought a 2005 220 select bowrider, with 350 Magnum bravo three, only 260 hours. Been running fine, no  problem until other day when alarm went off and said fault oil pressure on Smart Craft display. The analog gauge showed about 55-60 psi. Alarm...

pirate220 by Guest Contributor
  • 710 Views
  • 0 replies
  • 0 likes

1995 Sundancer 300 Ground Wire Size

Hi everyone,Wondering if anyone knows what the wire size is for the green ground bonding wires on a 95' Sundancer 300?  My bonding ring lug for the stern anode broke off and I'm looking to replace the wire and the ring lug.  I looked on the wires I c...

swopo82 by Guest Contributor
  • 1437 Views
  • 3 replies
  • 0 likes

Measurements needed...

I bought a Searay Laguna 17 center console. The boat is wrapped and in storage but needed to get the measurements of the steering console so I can start to layout for my re-wiring job I want to do. Does anybody have or know where to find the measurem...

VCAngler by Guest Contributor
  • 858 Views
  • 0 replies
  • 0 likes