Brunswick Community

Sonyarita · 08-20-2016

Additional info- I disconnected Shore Power physically and started the Gen., same issue and loaded Gen. significantly when AC kicked in just before tripping Main in MDP. Again no AC Relay/Pump Breaker or AC Breakers tripped in MDP. Why wouldn't the S...

Sonyarita · 08-20-2016

Returned to our 97' 400DB for our almost every other or daily visits to find one of the Main Breakers tripped in the MDP, and no raw water pumping for the AC's. Reset the Main and started the Salon A/C, tripped when the Compressor kicked. Checked Sho...

Sonyarita · 04-23-2017

Agree with all Raymond said. You can actually have your Prop "Tuned" at a Prop Shop as well. I drove for Mercury Racing a number of Years and Props can be adjusted by adding or taking out "Cup" and actually raise the Bow or Stern at RPM. In the case ...

Sonyarita · 10-02-2016

Thank you, it's flowing out about 16" from the Hull with a good rate. I have another tech coming this week will advise. Previous Hack that showed up said my forward A/C needed a Trigger? He then charged us $1,400 to "flush Lines" which were flowing s...

Sonyarita · 09-03-2016

Strangest thing, we had a Tech from a Marine Dealer come aboard and , as luck would have it, the A/Check fired right up with no issues. This kind of thing drives me nuts! Had him A-Z everything in the Cooling System and the front A/C, oddly, did need...

Sonyarita · 08-21-2016

Thanks for the feedback, I'm hoping it's not the Compressor for obvious reasons. I had a good Fluke DMM on board but pulled a rookie move at set it on top of the Gunnel, over she went. We're at the foot of a bridge in a "No Wake" Zone thato seemingly...

Brunswick Community

User Statistics

User Activity

Additional info- I disconnected...

Returned to our 97' 400DB for our...

Re: Hi all, Any suggestions on this...

Re: Returned to our 97' 400DB for our...

Re: Returned to our 97' 400DB for our...

Re: Returned to our 97' 400DB for our...