Good morning! We have a 340 and had exactly the same issue. Our mechanic, Aaron, of Aaron's Marine Service located at Narrows Marina took a look and our impeller was fried. The removed and replaced and we had Daves Dive Service dive on the boat. ...
I have the mercruiser 6.4 and my aic valves needed replacing. Changed both out AND the croutons. My croutons were so fouled that hardly any air was getting to the intake. Solved my problem and she starts right up now with no low end cutout. Its a...
All I can think of is to make sure that you have all new fluids in the generator. I have a similar one on my 340 and it needs to be warmed/primed before I start it. Your switch should have a 2 way push on it. Top warms it and the bottom starts it....
We had the exact same system installed on our boat (340 Sundancer) what a great system..so much information provided, especially when setting an anchor. Anyway, our thru hulls were installed in the engine compartment just forward of the engines. T...
We have a 12V Vetus 150mm 55kgf Bow Thruster installed on our 340. I think bow thruster installation is at the discretion of the owner as to the size and placement. Ours works fantastic and sure helps getting in and out of tight spots, and during s...