Brunswick Community

Proud_Warrior · 10-25-2020

I have a 2006 44 DB with an Onan 9kw genset. Yesterday after starting the genset while at anchor I noticed I am only getting 62 VAC (vice 120) supplying line 1 and the normal120VAC supplying line 2 in my AC electrical system. I cycled all cb's and ...

Proud_Warrior · 11-08-2020

Thanks; I did not consider that source. Will check it out.

Proud_Warrior · 11-08-2020

I had the same issue with my Norcold refrigerator last year. I replaced it with a Vitrifrigo stainless steel DP26001XAC. Perfect fit. Best decision we made. Runs quiet, no frost and now have a happy first mate. Beer stays very cold. Highly recommend.

Proud_Warrior · 11-08-2020

I have the same issue in the bilge void area under the guest SR head on a 2006 44DB. I have determined that it is not the fresh water tank as the level does not change, so I assume, somehow, rain water is finding its way to the bilge.

Proud_Warrior · 10-30-2020

Wingless- I wanted to close the loop with you and any others interested. The generator power output tested just fine. I found the common lead post of generator CB in the MDP tested bad with an ohm meter. Found a replacement CB at my dealership. Parts...

Proud_Warrior · 10-25-2020

OK, thanks. I would think with all of the diagnostics built into this genset that I would get a fault or code responding to a failed stator winding but who knows. I find it curious though that I am receiving exactly one-half of the normal voltage ou...

Brunswick Community

User Statistics

User Activity

I have a 2006 44 DB with an Onan...

Re: I have a '05 480 Motor Yacht and...

Re: Need Answers!! I have a 1993 Sea...

Re: I have a '05 480 Motor Yacht and...

Re: I have a 2006 44 DB with an Onan...

Re: I have a 2006 44 DB with an Onan...