Owner's Lounge
Gather to discuss all things boating-related.
cancel
Showing results for 
Search instead for 
Did you mean: 

Conversations

Boat lift specs for Conquest 285

I am getting a 2018 Conquest 285 and couldn't find any information on how to set my boat lift up to fit it. The size of the bunks, spread etc. Does anyone have any information on that? Boston Whaler said to contact the local dealer and the local deal...

GeneZ by Guest Contributor
  • 39 Views
  • 1 replies
  • 1 likes

Repower an old 15’ Dauntless

We inherited an older 15’ Boston Whaler Dauntless with a 75 hp Mariner motor. The boat’s in great shape but the motor is frustratingly unreliable and I’d like to replace it with a new one. My priorities are 1) reliability and 2) quietness. I’m leanin...

DavidK by Guest Contributor
  • 57 Views
  • 1 replies
  • 0 likes

370 Outrage bow electric table top loose

Just bought a 2012 370 Outrage. Love this boat!the bow electric table top is loose…you can see the threads separating from the backing plate on the bottom of the table where it connects to the raise|lowering mechanism Jack screw. Can’t seem to figure...

Sunblocksc by Guest Contributor
  • 321 Views
  • 0 replies
  • 0 likes

2006 110 sport shaft length

I have a 2006, 110 sport with the center steering. It currently has no motor. I’m looking to re-power with a 25 hp mercury, can anybody confirm with confidence what size shaft length I need?

Scb2987 by Guest Contributor
  • 233 Views
  • 1 replies
  • 0 likes

Galley in 2008 305 Conquest

2008 305 ConquestThe cabinets of the galley are making loud cracking noise when I am in motion. I have emptied the cabinets to see if it was things stored inside and the noise continues whenever we hit a wake or rough water. The noice is very loud an...

packerman by Guest Contributor
  • 298 Views
  • 1 replies
  • 1 likes

270 Vantage Fuel/Water Separators

Has anyone replaced the 2 fuel/water separators @ the rear of the bilge? If so, how the heck did you get to them? Also, when you disconnect them, is the fuel under pressure or just a small amount of spillage? Thanks. Glenn

glenn925 by Guest Contributor
  • 971 Views
  • 1 replies
  • 1 likes

270 Vantage Horn

Hi all. Has anyone replaced their horn in a 270 Vantage or similar? If so, where is it located, is it easy to replace, and what is the make/model you purchased? Thanks. Glenn

glenn925 by Guest Contributor
  • 580 Views
  • 1 replies
  • 0 likes

critical steering message "Helm-1 Port Engine"

I keep getting this message and have to shut down and restart every time. I replaced the steering actuator last year at great expense and am still getting these error messages. I always let everything warm up until I touch the steering wheel and rare...

Head Pump Loud Priming Noise

Hi all. I own a 2018 27 Vantage. When I turn on the head to be able to flush it, there is a loud priming noise coming out of the pump. After each flush, it makes the same noise. Any idea how to fix this other than replacing the pump? Thank you. Glenn

glenn925 by Guest Contributor
  • 1309 Views
  • 1 replies
  • 1 likes

Outrage 19 1973

 hello,first of all, I want to apologize for my English.i am looking for documentation?- listing- Advertising of the time (1973)For my Boston outrage 19 of 1973thank you.

IMG_1195.jpeg
Rondinara by Guest Contributor
  • 721 Views
  • 0 replies
  • 0 likes

Rub Rails maintenance

What is everyone using for their Rub rails? Basically to maintain it in good state, no to recover it just to protect from sun and salt.thanks in advance.

New 2023 Montauk 190 store on a lift without cover.

Getting these yellow spots on the deck on multiple places. Vessel is on lift no cover yet, and located on Boca Raton near of airplanes path. Unsure what is causing it, but most important how to clean this yellow spot. Really appreciate any advice.I c...

5594FDC5-88DE-4BDC-AE47-D385ED2BF9D1.png ECA81877-9203-4531-A9E8-57F43F745FDD.png 1F834316-D74E-480F-A16E-CD1C1D1DFDC7.png 874AC542-865B-4E0F-B485-0ED3E46DBDF8.png