This just popped up on my 2004 320 DA (Vessel View 703 display). Concerned about the low coolant pressure in starboard engine, and the IAC, Idle Air Controller output Alarm. Are these conditions related, and what should I expect? Got a call into ...
Thanks for the info, mufflers good, IAC valve bad. Tested it by switching valve to other engine, fault displayed. Replaced valve, cleared the IAC output alarm.
Not sure about any additional features on the Vessel View 903, since I did not consider it because of the size. The 9" screen would be very tight on my center dash panel, and the 7" screen fits well and is large enough to be easily read from the hel...
All of the Smartcraft data that you get on your analog/digital gauges will be displayed on the Vessel View 703. My boat does not have the rudder position or the trim tab position sensors, so I didn't have that information available, still don't. Ev...
The two major components, the Simrad and the Smartcraft Link come in the package with all wiring and connectors. I had a Marine Electrician hook it up for me just to be sure.
I just had a Mercury Vessel View 703 (7" screen), essentially a Simrad unit, installed for around $1.6k, and it was well worth it. The Smartcraft digital displays on the guages were so faded that I couldn't read them, and this was a big improvement.
