Glad you got it worked out! Once you can remove and inspect your heater, you may find that you only need to replace the heater core and not the entire heater unit.
I had this issue on our old boat. I purchased a brass coupler and attached the intake hose from the heater to one side of the coupler and the output hose to the other side of the coupler, added two hose clamps on each side of the coupler for good me...
Have you popped the hatch to make sure that you don't have any leaks/oil in bilge? On our boat we lost hydraulic pressure on our trim tabs on the starboard pod and immediately got error messages on Vessel View saying that skyhook was in standby/not ...
We replaced 2 of our 3 TVs with flat screens from Best Buy. Pay attention to the mounting bracket on the back of the TV so that you can reuse the bracket if possible. There are two possible bolt patterns so measure/take pics before going shopping. Th...
