I'm looking for the light switch location for my salon track lighting. I'm not getting power to the fixtures and trying to troubleshoot the problem. 1990 Sundancer 420
Mine has both 12V DC and 115V AC for lighting. The only 115V lighting is the trac lighting in the salon. I wouldn't mind changing that to DC but then again it becomes a wiring issue having to somehow pull wires from the panel to the trac. Much less c...
I checked today and found only 1 GFI and it's in the head and wasn't tripped. So I'm back to having absolutely no clue as to where the break is in the track lighting circuit. I guess I'm going to have to run power from the in the vicinity A/C tempera...
Very interesting. I didn't connect the head outlet to the track lighting.. Perhaps they are on the same circuit. I will check to see if the ground fault in the head is tripped. Thanks
I have checked all of that. I typically start at the power source and work forward to the light switch. Power at the panels and all the rocker switches feeding the lines but no power at the on/off switch for the track lighting. Somewhere there is a b...
Thanks for the response. I checked out that switch and it has no AC power going to it. I hot wired to the switch by running a dedicated 115V line from the ARRRR climate control switch right above it and got power to the track lights. So the issue ...
