Product Chat
Ask the community questions about your specific model.
cancel
Showing results for 
Search instead for 
Did you mean: 

Conversations

Is the BW installed Nauti-On monitoring system now useless?

my 2017 345 Conquest came with the Nauti-On monitoring system installed.  A few years ago use of that system switched over from stand-alone to integration with the BW My Whaler app.  Now, the BW My Whaler app only appears to recognize monitoring data...

Bdoran by Guest Contributor
  • 140 Views
  • 0 replies
  • 0 likes

Engine bracket installation

What bolts do I use to secure a bracket for a auxiliary engine at the port side transom of my Conquest 235 with a Mercury Verado 250 HP.

MEBSG by Guest Contributor
  • 178 Views
  • 0 replies
  • 0 likes

Access to Macerator Pump pipe work

Hi all, I have a 255 conquest and both of the Macerator Pumps have failed for the under deck kill tanks. I have removed the pumps and want to replace all of the hosing at the same time. There is a pipe that goes from the Macerator Pump to the rear of...

Brenden by Guest Contributor
  • 358 Views
  • 1 replies
  • 0 likes

Live Well

I own a 2018 Boston Whaler 285 Conquest.  The live well has two overflow tubes for the water circulation.  I want to find out where to purchase a plug for the lower overflow tube.  Let me know where I can purchase?

325 CQ Performance Data

Good evening and happy holidays!I have a 305CQ and I’m considering to re-power it with the Verado 300 hp V8 engines.  I’ve been reviewing the performance data of the 325CQ and something seems amiss. Please see below the two pics and I’m wondering why...

IMG_1853.png IMG_1857.png
ChoeyBoys by Guest Contributor
  • 607 Views
  • 0 replies
  • 0 likes

vesselview703 on a conquest 315

for the life of me, i can't figure out a way to reset the fuel use to zero after a fill up, it shows all the fuel used by the last owner, but reset does nothing.  any ideas would really help.

bobt2 by Guest Contributor
  • 819 Views
  • 1 replies
  • 1 likes

Transducer for Boston Whaler Conquest 325

We have a Conquest 325 with two through hull transducers installed (B175HW and B175 - both 20 degrees).  The depth reading drops in an out on occasion (often in shallow water) and I am being advised by the dealer that 1KW transducers are too powerful...

GregJM by Guest Contributor
  • 2192 Views
  • 7 replies
  • 0 likes

315 Conquest (2019) cushions falling apart

One of the cabin cushions in my 2019 315 Conquest started to show signs of cracking when the boat was 2+yrs old.  This cracking continued to grow like a cancer and now most of the cushions in the cabin are in some stage of deterioration.  I was told ...

Deteriorating Cushion.jpg
S2Oliver by Guest Contributor
  • 3698 Views
  • 9 replies
  • 0 likes

My Whaler App

Probably not the right forums for this topic but I’m at wits end trying to figure this out.  Try as I might I cannot get the “My Whaler App” recognize any up to date information for my ‘17 Conquest 345.  The App locks in the geo fencing fine and when...

Bdoran by Guest Contributor
  • 4134 Views
  • 8 replies
  • 1 likes
Labels