cancel
Showing results for 
Search instead for 
Did you mean: 

props for new 30 Phantom twin 300r power

jrod19
Guest Contributor

I have a 2022 30' phantom vee bottom, twin 300r motors. I've run 104mph with Dewald 5 blade over the hub props 32"x 15" x 17 degree rake @6400 rpms (the boat handled very good). I've run 96.8mph @6500rpms  with a set of standard looking 32" full barrel bravo 1s . what pitch Max 5s would you recommend and ST or standard Max 5? I do not need lift in the rear. I ran a set of hill signature 32" x 15.25 x 15 degree rake and the boats handling (very bad) was not good 103 mph  @6350 rpms. I would really like to buy a set of the 300hp cnc props. please help.

thank you ,

Jose Rodriguez 

5 REPLIES 5

Turbo
Guest Contributor

Jose, I have a new 32 Hellkat with 31' signature props 300 r's that ran 102 with more rpms to go. in cold wx the extra rpms will probably get me another 3 or 4 mph. I like this setup.20220626_111746.jpg

Turbo
Guest Contributor

my 32 Hellkat ran 102 with more rpm to go with 31" signature props on a 90 degree day. with cooler wx I should get more speed out of it. good luck with the new boat. I am trying to post a pic here but no luck so far. 

 

 

Turbo
Guest Contributor

20220626_111746.jpg

MercuryRacing
Team Racing
Team Racing

Looping in Mercury Racing's Propeller Manager, @NickPetersen 

I am a Brunswick employee.

NickPetersen
Team Racing

Hi Jose! Beautiful boat, being on the rev limiter, I would consider 33 pitch in the MAX5 ST. For the 300hp CNC Cleavers, you could step down to a 14.75 diameter, 18 rake, and go with a 34 pitch. The Hills are typically 2-3 inches of pitch stiffer than our cleavers, and run 4-5% more slip. 

Community Tips

We want your journey here to be as great as can be, so we have put together some links to help you get quickly familiarized with the Community.