Let's talk setups on bass boats, whether you're fully loaded with a partner, or running light for top end, what's your favorite setup between props, engine height, setback, etc? Post up photos!
Good morning everyone! If you are familiar with our blog, then you have probably seen our 9-part mini series on prop terminology and general prop knowledge that we have dubbed "Prop School". What are some other areas or facets of props you'd like to ...
Hello all and welcome to the forum, I wanted to make a quick post acknowledging our open positions within our team here at Mercury Racing Propellers. We are a small family here at Racing dedicated to perfecting our props by hand, if you are intereste...
Hi Toffen! I'd be happy to help. I do offer "tests" but the prop would still need to be purchased thru a dealer, if it doesn't work out I'd be happy to take it back on return.
Hi Bullet21, just like Brett said there are many factors when switching from a Bravo XS to a Pro Max. Bravos also run lighter in pitch, which makes the slip calculation come out high, 15-16% is pretty normal and I wouldn't consider 18% as too high. T...
Hi Joona! The 15.00" diameter models are currently only available in 26 to 27.5 pitch. The XP version features the same Pro Finish recipe as the 14.63" Rev 4 XPs, meaning leading edge geometry and cups are all in line. The blades do get slightly thic...
Hi Rouven, awesome setup. If you're running about 58 mph at 5800 rpm, those are very low slip numbers for Bravos. Consider keeping the 21 FS's and raising the engines up one hole on the transom.
Hi Jose! Beautiful boat, being on the rev limiter, I would consider 33 pitch in the MAX5 ST. For the 300hp CNC Cleavers, you could step down to a 14.75 diameter, 18 rake, and go with a 34 pitch. The Hills are typically 2-3 inches of pitch stiffer tha...
