It if probably a ventless unit. They hear the sure in the drum, then run cool water over the outside of the drum to condensate the moisture before it gets pumped out of the unit. If this is the case there will not be a lint screen to clean. There wil...
Pictures would help. I have a 370 express that I need to do the same with. On mine I will have to cut a caulk line that runs all the way around the dash panel that creates the pocket for the door as well as find a dozen or more hidden screws.
3 options come to mind. 1. You have already identified - upholster. 2. Make a cover to zip overtop of that bolster. Color match would be nearly impossible to attain, I would recommend a color that completely contrasts the existing while still complim...
Adding to what Winglass described. The adhesive that is used is 3M Super 77 glue. It can be had for about $15 a can at any hardware store. Just make sure to mask off any areas that you do not want the adhesive when reassembling.
I would recommend what you have as a temp solution only. Check with Depco pumps in FL. 727-446-1656 They are one of the best sources for OEM pumps that are near impossible to find.
