I have a 280 DA with low water PSI on the starboard engine at about 3000 RPMs. The PSI’s drop to zero as the engine approaches 3000 RPMs, alarm goes off, engine temp starts to rise. Seems to run fine at 2000 or less. My engines are 4.3 MPI, drives ar...
I have a 2005 Sundancer 280 and finally want to consider getting some fender cages/racks for my front rail(s). I usually only keep two fenders in front so I guess I could get away with just one rack, but do like the idea of them looking balanced wit...
2016 Sundancer 260. Just did manifolds and raisers replacement and keep getting sensor errors / alarm that does not let boat go above 3000 RPMS. Latest computer reading shows "Camshaft synchronization", a week ago it was showing " Engine Power Limite...
Hi All - 1997 370 Sundancer Had it for 20yrs, all of a sudden the air conditioning cooling is loosing is prime, only after a cruise. Calm waters or not so much, still loosing its prime. From the inlet to the sea strainer is only 12" long hose,...
Hello all! I bought a 2013 Venture 370 that had a damaged starboard glass panel. I would appreciate any help on where to find a replacement. Thank you in advance.
New purchase of a 2020 350 Cruiser with many factory issue's after delivery. How can I get assistance from Sea Ray, despite sending numerous emails and request both from their support website and from the dealership ?? I tried even calling support --...
We have a 2003 380 Sundancer. How do I get the bathroom ceiling/vanity light out to replace it?
Re; 2003 Sundancer 320. My fresh water system tank stops working when my tank is still 2/3 full. Pump runs-water spits out with lots of air . Fill the tank to the top and all is good until that 1st 1/3 tank is gone. Any ideas???
My '01 310 Sundancer has no rod holders. I like to fish a little once in a while, nothing serious but something I do. I have installed several"clamp-on" rocket launchers, but I really need a few on the gunnels. Is there anything in that space,bet...
We have a 2014 330DA and our left side stereo speakers were not working. After determining it was not the speakers, so we removed what we could so I could feel around best I could and found loose wires. After an hour fumbling around I was able to rec...
