As the title states, I just connected the battery (single battery, Outboard) and after flipping the engine switch to on, nothing. Plenty of power as horn, lights, trim all work. Battery is running at 12.8 amps. Nothing is tripped (that I can see in r...
Could someone tell me what the Accent Switch is for on my SPX210 2023.the switch is working (little light turns blow when is ON position.I also have an Courtesy Switch witch turns on all the interior lights, but can’t find out what the Accent switch ...
Recently I noticed that both my aft port and starboard drains are not draining. I suspect (but hope not) a small critter my have gone in one and died. Now plugging both sides. I want to access the bilge a clear the lines and inspect the bilge pump. T...
I just purchased a 2024 230 SPXOB I had to return it after one ride since the depth transducer was mounted incorrectly. I just got it back and I lose death if I go faster than about 35 mph have other people had this issue? The dealer obviously says t...
Good evening fellow Sea Ray Owners of the SPX210.Question for you all, have you all had luck finding the water separator fuel filter on this boat equiped with a Verado 200 Pro Supercharger. I cant seem to find one in mine.Here is a picture of the mo...
We bought a new to us 2021 SPX210. It still has warranty leftover till December 2025. It has a few minor things that need attention and I'm unsure if they are a warranty repair or I should tackle them myself.The carpet liner is falling down in the bo...
I'm trying to find where the speaker amplifier is located on my boat and I have had zero luck. If anyone here could show me a good resource or already knows it's location, that would be insanely helpful.
Has anybody found a proper anchor that fits a 2023 SPX210 anchor locker in the bow. It is a bad design with a very narrow compartment.
Good evening all,I have a 2017 Sea Ray SPX210 and am looking for some information where to find the water separator fuel filter on it. Thank you in advance for the helpVictor
I recently acquired the center cushion and supports for the front of the boat. The cushion snaps to the supports, but the supports didn't come with the screw-in snaps. Does anyone know what size snaps are used?
