cancel
Showing results for 
Search instead for 
Did you mean: 

My  2011 470 Sundancer needs a...

alanbrentleigh
Guest Contributor

My  2011 470 Sundancer needs a new isotherm CRL195 refrigerator/freezer or at least service on it. Fridge is warm while freezer is cold. Has anyone had to remove the cherry trim surrounding the unit?  Trim must be removed in order to slide unit out to get to the back for diagnostics and service. It seems to be glued in place. Hints and prior experiences are appreciated. 

4 REPLIES 4

Stress_Relief
Guest Contributor
I had the same problem. I clean all drains and adjusted the doors. It now works. Don't give up on it yet.

Zelda1
Guest Contributor
I replaced mine on my 2012 47DA. Cherry trim is glued and has mollies pushed in holes. Be careful to slide something behind the cherry trim to cut the glue loose. After I replaced the unit I just put chrome screws with trim rings at top and bottom to make removal easier next time. Looks very nice and it should have been done that way from the factory.

Zelda1
Guest Contributor
Also, the unit is a separate refrigerator mounted on top of the freezer. Completely separate units. That is why one is working and the other is not.

alanbrentleigh
Guest Contributor
Thank You. Much appreciated