Brunswick Community

garkov · 05-17-2020

Hi y'all, We have 2006 320 Sundancer with 350 MPI Horizon engines. Starboard engine stalls out slowly after running for 60 - 90 minutes. Fuel rail pressure drops from ~45psi down to 10 psi then 5 psi and stalls out slowly (takes 30 - 60 seconds to...

garkov · 05-17-2020

Hi y'all, We have 2006 320 Sundancer with 350 MPI Horizon engines. Starboard engine stalls out slowly after running for 60 - 90 minutes. Fuel rail pressure drops from ~45psi down to 10 psi then 5 psi and stalls out slowly (takes 30 - 60 seconds to...

garkov · 10-03-2021

Check out Bomar port lights at https://pompanettellc.com/product-category/portlights/

garkov · 05-25-2020

I asked the Tech Support guy at Mercury Marine about the service bulletin and cost reimbursement and he said directly that there would be no coverage due the age (2006 Gen III module) which is disappointing. Asked if he could direct me to a Mercruis...

garkov · 05-19-2020

Thanks Wingless, Both exhaust manifolds are running cool. However the Gen III cool fuel module housing is running hot on the starboard engine. Both starboard and port fuel module temps were at 74 degrees with engines cold/off. After 15 minutes wi...

Brunswick Community

User Statistics

User Activity

350 MPI Stern Drive Stalling Issue

Hi y'all, We have 2006 320 Sundancer...

Re: Hi, have a 2006 340DA SeaRay needing...

Re: Hi y'all, We have 2006 320 Sundancer...

Re: Hi y'all, We have 2006 320 Sundancer...