Brunswick Community

Therapy_on_the_ · 12-14-2020

Pulling my hair out and need help!I have a 2008 Sea Ray 340 Sundancer with twin 8.1 Horizon inboard. My port engine will not start, has no voltage to the key switch in the cabin. No gauges work, no tone when key is turned, no sound of the fuel pump. ...

Therapy_on_the_ · 10-20-2021

Hello,I have a 2008 340 SDA and if the shaft seals are the dripless.There is a spare seal on the shaft but I chose to move the shaft seal forward about 1/4" and this stopped the leak. You have to be a pretty small guy to get in between the engines.

Therapy_on_the_ · 08-15-2021

Congrats and you were fortunate to get a slip before the launch ramps close! We visit 3 times per year but store the boat in Big Water. My email is [email protected] and would love to communicate.

Therapy_on_the_ · 12-16-2020

Following the wiring diagrams and doing some of the action items you sent, the problem is solved. It was the fuse on the DTS power wire attached to the battery. I probably would have looked at the fuse earlier if I could see the wire but the wire fel...

Therapy_on_the_ · 12-15-2020

Thank you so much for the manual link. I thought I had every manual ever made for this boat but this one from an electrical perspective is much easier to navigate. You have shared a number of potential remedies and I will let you know the outcome.Tha...

Therapy_on_the_ · 12-15-2020

Thank you so much for the response, I tried the emergency start yesterday and nothing different happened.When you mention port engine contactor, do you mean the solenoid located in the master DC panel?I can tell you that the port engine switch in the...

Brunswick Community

User Statistics

User Activity

Pulling my hair out and need help!I...

Re: We have a 2006 340 SDA and have...

Re: Hello All! We are SO EXCITED to...

Re: Pulling my hair out and need help!I...

Re: Pulling my hair out and need help!I...

Re: Pulling my hair out and need help!I...