Product Chat
Ask the community questions about your specific model.
cancel
Showing results for 
Search instead for 
Did you mean: 

Conversations

Thru Hull Transducer on newer model Montauk

Hello, has anyone out there installed a thru hull transducer in one of the newer Montauks? I have a 2020 170, and I wanted to install an Airmar B175 into the small bilge area underneath the deck sump. It is fairly close to the drain plug, but there i...

Tkki1230 by Guest Contributor
  • 535 Views
  • 0 replies
  • 0 likes

Boston Whaler Low Profile

Hello,someone has any information about the Boston Whaler Low Profile?Is it built in the typical (unsinkable) way of the others Whaler?Why it hasn't been produced anymore?Thank you in advanceA.P.

AleP by Guest Contributor
  • 2079 Views
  • 5 replies
  • 1 likes

Replacement part for bow light on 2014 Montauk21

Hello,I'm trying to find a lens cap for the bow light on my 2014 BW Montauk 21.  The light itself is in good shape, but the lens is cracked.  The folks at BW tell me the part (#1836209) has been discontinued so I'm searching other avenues to see if I...

dabooman by Guest Contributor
  • 1720 Views
  • 4 replies
  • 0 likes

315 Conquest (2019) cushions falling apart

One of the cabin cushions in my 2019 315 Conquest started to show signs of cracking when the boat was 2+yrs old.  This cracking continued to grow like a cancer and now most of the cushions in the cabin are in some stage of deterioration.  I was told ...

Deteriorating Cushion.jpg
S2Oliver by Guest Contributor
  • 2887 Views
  • 9 replies
  • 0 likes

Resolved! Looking for exact model and documentation

Hi everybody,I just bought a used Boston Whaler boat (sold as a Boston Outrage 17 1995) without any documentation. I unsuccessfully browsed the web to find some doc but I’m not sure of the exact model of my boat. I found this (Boston Whaler Owners Ma...

Aurell by Guest Contributor
  • 1177 Views
  • 2 replies
  • 0 likes

Resolved! What Model and Year is this???

    My dad recently passed and left me this boat, but the title only says 1990 17ft BW.To get a new title they are asking me the model. Is this a 1990, and if so what model is it. I sent the HIN to BW inquiry, but they had no data on it. Thanks

2B451246-CDA6-472B-AB51-20CE62D0FE04.jpeg 7B65032B-3D30-4AFC-BA41-6B3573562AB8.jpeg E487A709-A9C1-4C54-9CDA-E3D60878E284.jpeg

17' Outrage 2

Has anyone installed a raw water washdown pump on the 17 ourage ?

Gfick by Guest Contributor
  • 470 Views
  • 0 replies
  • 0 likes

motor size

I have a 1990 15' Sport which previously had a 60 hp Johnson outboard. Not a 4 cycle. It worked well but now we have trouble getting parts and need a new engine. A marine shop nearby wants to sell me a used 70 hp Suzuki four stroke (155 KG; or 340 lb...

drolfe by Guest Contributor
  • 1480 Views
  • 1 replies
  • 0 likes

Outrage 18 HELP

Hello everyone I really could use some help on this one. I have a 1986 outrage 18’ and am planning to swap out the old fuel tank with a new one when I repower. Does anyone happen to have a spec sheet for the original tank or anyone they can refer me ...

IPHONE HOLDER FOR T-TOP MOUNT

HELLO WHALER FAMILY: IS ANYONE USING A GOOD IPHONE BRACKET SYSTEM THAT MOUNTS TO EITHER HARDTOP OR T-TOP TUBE? PLEASE SHARE!!! 

CaptBrett by Rising Contributor
  • 1740 Views
  • 3 replies
  • 0 likes

Factory Tours

I've toured the factory twice over the years and would love to do it again.  Any idea when Whaler will start them again?

bballance by Guest Contributor
  • 886 Views
  • 0 replies
  • 2 likes

Resolved! Drive-on Floating Dock and a new 130 Super Sport

Hello! I have just become a owner of a 2022 130 Super Sport! What a great boat! I have a question about my drive-on floating dock. It has rollers but they are setup to support weight of the keel and they are pretty wide. I have included a picture bel...

floating.jpeg

auxiliary engine - revenge 21 - central main engine

Ciao everyone!I would like to install an auxiliary engine to support the old main engine on my Boston Whaler revenge 21.My grandpa gave me the original bracket, but I'm wondering where to install it and which kind of engine should I use, like "stem" ...

CA82BCB3-FE4A-4C99-957A-B0D1148C5BB4_1_105_c.JPEG b8140647-1957-49d9-a751-937b1b41ccd6 2.JPG PHOTO-2022-03-27-17-51-36.jpg
Giosala by Guest Contributor
  • 1329 Views
  • 2 replies
  • 0 likes