Another 300 slx question. The trim...

[Bmore_Badger]

Another 300 slx question. The trim tabs don't seem to be functioning. When planing the boat has some starboard side 'lean' which I try to adjust with the trim tabs. The digital indicator stays at 0 on the engine displays when I adjust either one of the tabs. Wondering if this may be fused or something else I can check?

Thanks.

[Captain_Zero]

More than likely a own fuse. Think it's a 7.5amp fuse on main fuse panel. You can look in owner manuals should have wiring schematic for boat. If not think you can find digital copy of owners manual at sea ray.com

[Captain_Zero]

Not sure. But normally trim tabs are not displayed as digital read out. You are probably seeing trim on the foot. Engine trim sensors go bad all the time

[Captain_Zero]

So it is probably the main fuse on bulkhead.

[Bmore_Badger]

Thanks everyone it was the fuse. Would be a good idea for sea ray to include a visual on where eat tab is as it can get confusing.....all set!