We bought a 2019 Sundancer 460...

[rhodosh]

We bought a 2019 Sundancer 460 with a hydraulic swim platform. What types of tender or wave runner will that platform support?

The boat came with two refrigerators. We are replacing one of the refrigerators with a freezer. Is there any interest out there in the refrigerator that we are replacing? 

[Lucky_five]

I might be interested can i please send email me at [email protected]

[SeaMax]

Your platform will support any type of tender or wave runner that is within the weight rating on the platform. Sea Ray uses a 3 rd party and I suggest you figure out who the manufacturer is and contact them directly. As a reference, mine is on a SR410 and capacity is 850#

[boating1]

I had a wave runner on my 44 SD. I believe the weight limit for the GHS lift is max 1000# I’d keep the runner to no more than 800#. But call GHS at 727-571-1065. They are very helpful with questions and answer about your lift.

[lady_Patricia]

We have a 2018 460 and find that we use and need both refrigerators. However, I would be inclined to hang on the extra fridge, the tend to breakdown after a few years. A spare could come in handy. I also have the hydraulic swim platform. We just use it for a rubber dinghy. I would be concerned about adding too much weight back there due to boat trim.

[rhodosh]

Thank you for your advice. I will contact GHS.

Regards,
Ralph

[Bill12]

I agree with Lady Patricia, save it for a later day. They will quit making that model and you may have trouble finding a frig with the same dimensions.

[boating1]

The max weight on your lift is 850# if I recall. GHS installs the lifts for Searay. Go online and look up the specs etc. GHSLIFT.com they have a great customer phone service too.

You should look into buying a Williams jet dinghy. They are a superior Tender. Because there is no outboard you can actually get a much larger tender for your boat. You also don’t have to worry about the engine sticking out as well. If you want to stick with it additional tender with an outboard you need to max out at about 10 feet because with the engine in the up position which is how you have to store it you lose a few feet. Good luck be great to hear what you end up with.