Herrickjde
Guest Contributor
since ‎08-25-2019
‎07-07-2022

User Statistics

  • 9 Posts
  • 0 Solutions
  • 0 Likes given
  • 0 Likes received

User Activity

I purchased a new actuator and it works when I connect it hot to a 12 volt source and reverse wires to extend and contract the piston. I also replaced the toggle switch on the helm and when I meter the 2 wires at the actuator I get 12 + and 12 - when...
I purchased a new actuator and it works when I connect it hot to a 12 volt source and reverse wires to extend and contract the piston. I also replaced the toggle switch on the helm and when I meter the 2 wires at the actuator I get 12 + and 12 - when...
Galley Exhaust Fan 1998 290 Sundancer No Power is going to the 2 wires (Yellow & Black) for the fan and the fan switch has metered good.  I do not have access to wiring diagrams and there must be a blow fuse somewhere and I cannot find the fuse block...
Hi,New to the group and just purchased a 1998 290 Sundancer.  twin 4.3 ltr 190 hp MC / I/O.   Just curious if any of you have this same configuration and if so, what is your cruise and top speed.   I cannot get more than 4,000 rpm / 25 mph  / 4 blade...