Hi All! I own a 2008 SR 290 AJ. It is powered by twin 5.0 liter Mercruiser V-8s. I got a fuel injector error message in the display on the tachometer of one of the engines. The injectors and the fuel delivery rail were replaced. The plugs, ignition w...
Hello. I need some advice please on increasing the range of my 2004 260 Sundancer. I am considering buying an extra fuel tank and installing it in my engine compartment. Has anyone done something like this before? I am trying to get a feel for what I...
Hi Captains, i just bought a new to me 2004 320 SD. when i pulled it out for storage i noticed it has different prop sizes 18x18 starboard 18x19 port. does anyone know what the factory prop size should be or point me in the right direction for a se...
First time to winterize my 1998 290 Sundancer, single engine. Hardware store person said NOT to run RV antifreeze through the water heater as it would ruin the electrical heating element. I could not find this anywhere else, so I'm asking if anyone...
I have a 2003 Weekender 245 and need to remove the cabin door for maintenance. Looking for mysterious PDF that explains how to do it. I heard it is similar to 240 sundancer... THANK YOU
I own a 2008 Amberjack 290 with twin 5.0L engines with Bravo 3s. I had to have the transom assemblies replaced due to corrosion. Both of my starters needed replacement soon after the engines were reinstalled. I made the mistake of not having the star...
coltsneckbob (Owner)I have a 2002 340 Sundancer. It has 8.1s. I want to replace the manifolds, risers and elbows. They have seen 5 seasons now. I've been googling the parts and I noticed that besides OEM there are a few after market replacemen...
Need some help. I have a 2002 SR 340 Sundancer with 8.1 v-drives. Sometimes at idle throttle settings the port engine is 100 to 150 RPMs faster than starboard. This just started a month or 2 ago. The starboard engine is always in the normal idle ...
1992 270 Weekender hot water tank leaks at the heating element and the rubber o-ring it sits in. Trying to determine if I can buy a replacement assembly or something else to replace it . Any suggestions would be appreciated.
Can someone tell me what the size or dimensions are for the forward bed on a 2008 330 Sundancer? Thank you!
