Have a 2008 29' Amberjack that...

[falcor]

Have a 2008 29' Amberjack that is listing on the Starboard side.  My moisture meter is show that the area where the hot water tank sits is high moisture content . Does anyone  know if the area below the hot water tank is foam filled. This would be between the outer hull and first stringer .It was suggested that I drill a hole in the top of the platform in front of the tank to see if is , also if it is water or salt water.

Have contacted Sea Ray, but have not heard back.

[Pilotwood51]

I have a Sundancer 310 that also lists to starboard. Could it be the holding tank?

[falcor]

My holding tank is on the Port side, hot water tank is on the Starboard side but is enpty. Sea Ray Tech support said to drill a hole below the hot water tank shelf and see if water drains. They also sent a drawing of the areas of the boat which are "foam filled" I plan on cutting/drilling a 4" hole on the Starboard shelf just in front of the water heater to see if water has seeped into the plywood/fiber encased cavity which is 2.3 lbs per cubic ft foam filled Thanks for the reply.

[Drago]

I would bet it is foamedinside. However but any leak would have to go thru the fiberglass deck to get to that area nad I would think it would run out into the bilge area long before it seeped into the spar area. If its got water, I suspect its entering from another source.