Cabin Cruisers
cancel
Showing results for 
Search instead for 
Did you mean: 

Conversations

I have a 1994 300 Sundancer. I...

I have a 1994 300 Sundancer. I am looking for the Shore Power 30 or 35 Amp breaker located between the shore power receptacle and the distribution panel. So far I have looked everywhere in the engine compartment, no luck. I am thinking its probably t...

Verm by Guest Contributor
  • 1904 Views
  • 3 replies
  • 0 likes

I have a 2003 Sundancer 300 with...

I have a 2003 Sundancer 300 with 5.0 MPI Engines and 2 fuel tanks each feeding one engine.  I want to install a FloScan system on each engine to get real time useage and flow rate. I noticed the diameter of the FloScan sensor gas holes are 1/4" ID  w...

MrB18 by Guest Contributor
  • 951 Views
  • 2 replies
  • 0 likes

I have a 1994 Sundancer 300. Not...

I have a 1994 Sundancer 300. Not getting any power to the shower sump pump. Checked all the breakers, and they are good. Could not locate an inline fuse nor could I tell where it picks its power up from. Followed wiring until it goes under the floori...

boston49 by Guest Contributor
  • 1553 Views
  • 3 replies
  • 0 likes

Hello all, I have a head smell...

Hello all, I have a head smell every time I flush.  2002 260.  What should I check first, I had this issue two years ago and it was fine until this year after having it de-winterized. Billy T

Chillin by Guest Contributor
  • 1364 Views
  • 3 replies
  • 0 likes

Hey all, new boater here with a...

Hey all, new boater here with a 2007 340 sundancer. While coming back in yesterday after cruising for about 3 hours, my port engine just quit.  The engine was still running but not registering any RPMs and absolutely no power. I had to limp back to t...

I have a 2018 260 Sundancer and...

I have a 2018 260 Sundancer and i'm having a lot of trouble with the trim tabs. The boat is totally unstable when i have 7+ people on it. Any tips for how to use trim tabs?

e615 by Guest Contributor
  • 1336 Views
  • 3 replies
  • 0 likes

Looking for info on Item# 789610...

Looking for info on Item# 789610 Refrigerator 6.3 CF CFC Free AC/DC 110. Who is the manufacturer, what size and model number is it? I believe our refrigerator went out. It’s not cold, the green Power light blinks and the motor makes a pulsating grin...

Bob_42614 by Guest Contributor
  • 403 Views
  • 0 replies
  • 0 likes

Warning Horn Location?

I have a 2000 310 Sundancer with twin 350 MAG MPI Motors and V-Drives. The engine warning horn recently stopped working. Believe the warning horn is located inside the helm station, but cannot locate it. Does anyone have idea on where it is located?

JTV by Guest Contributor
  • 443 Views
  • 0 replies
  • 0 likes

My 2005 Sundancer 280 seems to...

My 2005 Sundancer 280 seems to have a port side engine gear lube oil leak...any idea where it might be and how I might go about diagnosing it?  I have a great engine mechanic friend IF I can locate it and it's topside, if not I need to go another rou...

BMann by Guest Contributor
  • 1827 Views
  • 4 replies
  • 0 likes

Starting issue, 2003 34' Sundancer, The...

Starting issue, 2003 34' Sundancer, The Port engine starts right up. The Starboard would not but with no starting buzzer sound it started with the jumper button pushed in. All gauges came on, ran fine. Tried to start again later and it started with t...