Glad to help.
No idea on the specific placement. That is the only image I located on-line for your model w/ the lift.
NB, the lift is a structural device. On my 380DA the lower lift point is attached to the side of a stringer, boxed on one side w/ a thick aluminum ell bracket and on the other side w/ an aluminum plate. On the top there is a flat plate on the lower side of the hatch, carriage bolt heads on the top.
Also on my 380DA, I can access the hatch lift clevis pin, to disengage the lift for manually raising during failure, such as a dead battery.
Mine also has a secondary rod that may be used instead of the lift, for manual placement to hold-up the hatch if the lift is removed.