2018 SDX 270 with watersports arch/tower. I’m...
2018 SDX 270 with watersports arch/tower. I’m looking at adding tower speakers, notices the rubber grommets in the arch, wondering if they come from the factory ore-wired.
2018 SDX 270 with watersports arch/tower. I’m looking at adding tower speakers, notices the rubber grommets in the arch, wondering if they come from the factory ore-wired.
Boat: 2006 320DAI am looking for information (a diagram would be helpful) on where the duckbill valves are located and the part number for the valves.A side question: Does Sea Ray have a "Service Manual" of sorts for this model boat? I have the owner...
Where can I find part# 1831271 340SDA 04,CVR,PRT DECK VENT? Sea Ray does not make the part any longer and does not have molds. this is the port deck vent cover. The piece is only held by epoxy and blw off during transport. Any help is greatly appre...
I just purchased a 2007 Sea Ray 310 Sundancer. Previous owner kept boat in immaculate condition and I plan on doing the same. Question, does anyone have any recommendations on what wax to use prior to boat going in the water in the spring. Also, w...
Ok, found my float switch was bad so, I replaced it and purched a new 1100 gph pump. The blue base of the pump is a little different but for some reason when I left the float switch the pump runs but just won't pump the water out. So, I took the pu...
I have a 2002 260 Sundancer. The bilge has water just above the red & white pump. When I turn the pump on via the main console the light comes on but no sound and the pump does nothing. I'm going to pump out all of the water from the bilge. What ...
I have a 2008 210 Fission I want to cover the swim platform with foam decking and am wondering if anyone else has installed this material over the logo-embossed nonskid padding on the existing swim platform?
where can this be sourced? Mine has shrunk over years and now 1” spaces exist on each window