Community Connection
Advice and support from fellow boaters
cancel
Showing results for 
Search instead for 
Did you mean: 

Conversations

Simrad forward scan

Hi Folks, I have a 2018 SDX 270 with a Simrad NSS12 EVO3. I have to constantly run very shallow winding and unmarked stretches to get to and from my lift. I’m thinking about adding Simrad Forward Scan and was hoping someone might have experience or o...

Dave10 by Guest Contributor
  • 53 Views
  • 0 replies
  • 0 likes

Hydra Foil

Anyone using a Hydra-Foil on their outboard? I’m really struggling with grounding in shallow river water at low tide that I need to run every time I head out (or in). I was looking at a skeg protector when I found the Hydra-Foil. I know I might lose ...

Dave10 by Guest Contributor
  • 71 Views
  • 0 replies
  • 0 likes

Leaking covers and Sea Ray support

So this is my first Sea Ray and my first experience with their goal of “Unrivaled Support”. As many users have reported the cockpit covers leak like crazy around the tower. In trying to get guidance on a fix , Sea Ray sends me to Great Lakes who make...

Dave10 by Guest Contributor
  • 212 Views
  • 2 replies
  • 0 likes

Customer NO SERVICE

In the past Sea Ray’s customer support has been fantastic. I have a 2008 Sundancer 38 and have alway been able to call and get a part number so I could order a replacement.  Yesterday I called Sea Ray’s customer support number at (386) 439-3401 and t...

B_Smith by Guest Contributor
  • 178 Views
  • 1 replies
  • 0 likes

Fuel line pickup problem

I have a 2019 sdx 270 with a verado 300 OB. I recently had the boat detailed. It ran for about 10 mins then bogged down and stopped after that. The guy who sold it to me had warned me to avoid washing the fuel vent outlet. I don't know if this happen...

LSULSU by Guest Contributor
  • 94 Views
  • 0 replies
  • 0 likes

First time posting here.  2000...

First time posting here.  2000 Sundance 410 with Cat 3126s.  Port engine tack, fuel gauge and oil pressure gauge jump around from zero to normal reading, except tach will jump to impossibly high reading.  Other gauges and everything on starboard side...

BobHeine by Guest Contributor
  • 363 Views
  • 5 replies
  • 0 likes

Hello. I have recently acquired...

Hello. I have recently acquired a 1988 sea ray seville with the 100 hp outboard motor. I'm currently getting no spark and my alarm system is going of. Engine is cold and oil  Reservoir is filled. I would like to see if I could find a wiring diagram o...

Jmanjared5 by Guest Contributor
  • 149 Views
  • 1 replies
  • 0 likes

98 310 DA port side propulsion issue

I have a '98 310 DA w/ twin 350 Mag engines w/ Velvet drive V drives. approx 575 hours on each, with recent oil change and tune up.I'm fairly new to the boat. Both engines run up fine to 4800 RPM's in Neutral.However, with both trans in gear, Starboa...

Jayman729 by Guest Contributor
  • 89 Views
  • 0 replies
  • 0 likes

Hi SR owners,I have a 2009 310...

Hi SR owners,I have a 2009 310 Sundancer.My joy stick is not functioning. Vessel View says it’s no available. Canceled alarm history and it still won’t work.Any suggestions?

Mel-O-Di by Guest Contributor
  • 537 Views
  • 8 replies
  • 0 likes
Labels