I have a 2019 270 SDX. The windlass stopped working and I had to retrieve anchor manually by hand. Any ideas? It was a strong wind, strong current day when it failed. Where are circuit breakers or fuses? Thanks in advance for any help
I have a 2006 205 Sport with a 5.0 L MerCruiser Chevy engine that was purchased new. Recently when we were just on the water I found that the engine had blown a drain plug out of the side of the engine block. Obviously it was blowing water and the ...
I have a 2007 240 sundancer. Does anyone know the purpose of this piece ?it came with the boat.
Hi, all! So-question for all inboard owners. I’ve got an 05 185 Sport. I am having to top off the drive lube levels about two times each season...I’d estimate after about fifteen hours of use or thereabout. I don’t lose much, but I am starting to...
Hi all, Just purchased a 2004 270 Sundeck and it didn't have the tables. Does anyone know where I can get them ? I'm in North NJ Thanks
Hello all, Does anyone know the part number for the windshield wiper arm on a 270 slx? 2011 to be specific, dont know if the year matters. Thank you in advance
Hello:I have a 2017 280 SLX with factory windless. Dealer says anchor comes with 60' of Chain and 60' of rope. The research I have done, it should have 14-to-28' of chain and approx 150' of rope. 30' of water, 5 x depth = 150' I anchor in GA In-Lan...
Not too long ago I purchased my new SPX230. After only four trips on the water I am noticing loose screws all over the boat. Several of them are literally just falling out and luckily I’m finding them so far. I’ve screwed them back in. Two screws on...
I have a new SDX250 and purchased a generic Land N Sea anchor (for 25'-30' boats) that is too large for the bow compartment. It seems that the smaller version will be too large as well. Does anyone have a recommendation? I only need to anchor in t...
anyone have any tips on how to use the pulley system on the cover for a 270 SDX. No matter how tight i pull the cord, water continues to collect on the canvas. Thanks in advance for any tips on how to eliminate this problem
