cancel
Showing results for 
Search instead for 
Did you mean: 

I have a 2018 SPX 190 OB.  It has...

PortsmouthSunri
Guest Contributor

I have a 2018 SPX 190 OB.  It has the Rockford Fosgate entertainment receiver. There is condensation on the screen. It is still working, but it is difficult to see the display because of the condensation.  Is there a way to remove that?  I'd rather not go through taking it out as getting access is not easy.  Maybe somebody has tried something from the outside to dry it out.

 

Thanks

2 REPLIES 2

wingless
Rising Contributor
Welcome to the forum.

This link shows that Rockford Fosgate receiver.

https://images.boattrader.com/resize/1/61/74/7856174_20210419092411374_1_LARGE.jpg

Internal drying works best with an internal heat source, such as an amp or lamps. I've had luck w/ fogged gauges by operating the running lamps and covering w/ a towel. Now I use my custom dash cover to ensure rain and garden hose doesn't cause fogging.

Remember that the receiver should be sealed. Disassembly w/ careful seal and mating surface cleaning might restore the water integrity.

There should be a nearby access panel that was used during assembly to permit removal / replacement, perhaps under the dash overhang.

PortsmouthSunri
Guest Contributor
Thanks...I'll try and see if I can work it out.