My 2007 40 MY has an issue with water intrusion in the master stateroom. This only occurs when we encounter seas with wind driven spray hitting the sides of the boat. Water comes from under the shower on the starboard and from under the steps on the ...
I took delivery of a 2018 460 on Feb 1st 2018. While I generally love the boat, I have experienced more than a few problems. So far SeaRay has replaced the depth sounder transducer, the radar, both Axiom screens and the insane sound system that only ...
For anyone that has more than a 5 year old boat and the CO detectors have hit their "end of Life". The manufacturer of the OEM detectors in my boat no longer make a unit with the generator relay switch internal to the units. You have to buy a separ...
I am searching for the OEM for Canvas for a 2002 460DA (backdrop, dash cover and sundeck cover.) The original canvas is the best I have seen and would like exact replacements.
Getting my 2016 Sea Ray 400 ready for the summer. In addition to the yearly pressure cleaning and bottom paint they are recommending that they apply Prospeed on the props and shaft, and it's not cheap. Anybody uses this product? Do you recommend i...
My 2002 460 has a habit of spitting fuel from the overflow/vent while refueling. It starts right away, usually the starboard side and nothing seems to stop it completely. We have throttled the flow, weaker to faster, and nothing helps. Has anyone ...
Hi. New Sea Ray owner - 2016 Sundancer 400. We are boating on Lake Simcoe. Drop a line....hope to see Sea Ray's on the water!
Jet ski...anybody have experience hauling a jet ski on a 44 or 420 Sundancer with diesels on a hydraulic swim platform. Does the boat become noticeably tail heavy? Performance wise can the boat comfortably handle the extra 500 lbs+/-? Thanks for any ...
Trying to find 3 replacement Anchor Rollers for my 99 460 Sundancer. 3/4" bolt and 3.5" wide rollers. Does anybody have any idea as to where I may purchase these? Thanks, Kurt
Have a question on the bonding system on a 1994 440 Sundancer. I recently noticed a bonding wire corroded off at the eye crimp on one of the two lugs on the hull zinc on the transom (inside boat) so only one wire is connected to the hull zinc. All ...
