My vessel view show my water and waste tank levels without any measurement or empty. My waste tank indicator at the head shows various states of fill, so it tells me there is an operable tank level sensor in the waste tank. I’ve played with vessel vi...
I have a general question re Vessel View. I have 2012 310 sundancer with 5.0 Mercs. On the Vessel view screen that shows temp, oil pressure, voltage, and water pressure, what Is an acceptable water pressure? Port engine bounces around from zero t...
How about this. 2012 310 dancer. The original smart craft vessel view shows Port Engine Misfire every 10/15 minutes in the status bar. I clear it simply by depressing “x”. There is no indication of a problem from the performance of the motors. I...
So I inadvertently killed the power to my 2012 310DA the day I left for. 2week vacation. Not sure what to expect when I return. Still in vacation. Will year old batteries be dead? If dead can I simply plug in and let the battery charger recharge ...
Tlrlc, thanks for info. I can live with things the way they are. I just wanted to understand if there was some way to utilize vessel view tank indicators with existing stuff.
I had similar problem, low hour gen. That starts and runs for 5 sec then shuts down. I was never able to find the actual problem, but found out that if I shut down the gen before it shut itself down, then restarted, it ran ok.
I added a 4”foam insert to my 2012 310 dancer. I made a template, gave it to my local canvass/upholstery guy and he cut it out of 4” stuff. It goes up to the bolsters, and stays fine. I had hinges at the locations where the flip up back rest, and wh...
Scott Monroe. Thanks, found a local canvass/upholstery fabricator that I am working with. I am supplying pattern , and they will supply 4” foam mattress. Next piece of puzzle is fitted sheets.
