2003 Amberjack 290. Issue with STBD fuel tank guage. Fuel gauge reads correctly when first powering up/starting engine. While underway, the needle is all over the place, sometimes reading Empty, 1/2 or 1/4 full, etc. I can confirm that i had approx. 3/4 of a tank. Just filled the tank to the brim and see same behavior.
I was told that this could be a poor electrical connection to the float switch in the tank. Where is the float switch located and HOW can it be accessed? There is NO clearance between the floorboards and tank to confirm, let alone make a repair.
