Sea Ray

Malbertcfi · ‎01-09-2020

I have a 1990 Sea Ray 420 DA. I need to replace several dc interior light rocker switches. Anyone have a good source for these?

wingless · ‎01-09-2020

Welcome to the forum.

Could an image please be posted showing the style?

Malbertcfi · ‎01-09-2020

Here is one photo. They light up when off

Malbertcfi · ‎01-09-2020

All of the interior DC lights seem to use the same switch.

wingless · ‎01-09-2020

Please try again, no photograph has been located.

Malbertcfi · ‎01-09-2020

I just sent again. Hopefully it comes this time

wingless · ‎01-09-2020

The image worked this time. I edited and reattached.

This switch looks close.

https://www.fpmarine.com/Eaton-Heavy-Duty-On-On-Rocker-Switch-p/misceaton1.htm

Malbertcfi · ‎01-09-2020

I agree that they look close. I’ll check out their site too.

Malbertcfi · ‎01-09-2020

One other unrelated question, I have Cat3208TA’s, any idea where I could get fuel burn estimates?

wingless · ‎01-09-2020

This has info...

http://goldcoastpower.com/brochures/cat-3208-propulsion.pdf

wingless · ‎01-09-2020

My boat was built w/ these three-position Vimar Idea square switches and receptacles.

When I modified my boat I remained w/ those same parts, w/ the polished brass face plated.

These are pricey, but look great and I have had zero failures. There is unbelievable parts selection on this product line.

https://www.apexlighting.com/vimar-switching/

wingless · ‎01-09-2020

Here are some images where I added the cockpit and salon audio amplifier switches onto my 2000 380DA that the factory installed on 2001 and later boats, using those Vimar Idea square switches and polished brass face plates.

[img]https://live.staticflickr.com/65535/49359349282_565e787051_c.jpg[/img]

[img]https://live.staticflickr.com/65535/49358671243_53ccf0ea5d_c.jpg[/img]

[img]https://live.staticflickr.com/65535/49359349297_4ce3d7813c_c.jpg[/img]

[img]https://live.staticflickr.com/65535/49358671263_91cd0b6658_c.jpg[/img]

[img]https://live.staticflickr.com/65535/49359142926_f39d91d011_c.jpg[/img]

[img]https://live.staticflickr.com/65535/49358671123_b96f6aebbf_c.jpg[/img]

[img]https://live.staticflickr.com/65535/49359131376_9527e6482c_c.jpg[/img]

[img]https://live.staticflickr.com/65535/49359338067_65605873f4_c.jpg[/img]

[img]https://live.staticflickr.com/65535/49358671193_d7898ef2fb_c.jpg[/img]

[img]https://live.staticflickr.com/65535/49359338102_57a9f1c20f_c.jpg[/img]

pairofjacks · ‎01-12-2020

Try Flounder Pounder website fpmarine.com

Bobcat · ‎01-12-2020

Have you tried fp marine they have replacement rocker switches for sea ray I used them for my 2001 310

Airwaves · ‎01-12-2020

Has anyone replace track lighting in their salon and if so, with what? Mine is 93- 550 sedan bridge

Airwaves · ‎01-12-2020

@Paul Ferrara Nice job on the switches. What labeling device are you using for the wires? That’sa great idea.

wingless · ‎01-12-2020

The Brady IDXpert label system has been a solid performing tool for me.

This has surface label stock, heat shrink label stock and self laminating label stock.

Prior to getting this tool I printed from Excel on plain paper, cut rectangular “labels” used a small piece of double stick tape, wrapped around the wire, then covered w clear heat shrink tubing. Those labels still look great after well over a decade.

Boblouns · ‎03-15-2020

Check The Pacer Group at pacergroup.net

Drago · ‎03-28-2020

If your referring to the ones like the ones at the helm, I just purchased a number of replacements from https://www.fpmarine.com/Default.asp

rsg · ‎05-17-2020

Just came across your post. Try. www.newwiremaine.com

Sea Ray

I have a 1990 Sea Ray 420 DA. I...