Sea Ray

CRJ1 · ‎11-11-2019

Sea Ray part #1220698 TRIM, DECORATIVE BRS 1/4". My existing trim is showing its age and needs to be replaced. Have searched the internet using the above part number/nomenclature - with negative results. Anyone know where I could locate the trim?

wingless · ‎11-11-2019

This looks like it might work and is close to the original.

https://www.trimlok.com/plastic-extrusion/edge-trim/decorative-trim

CRJ1 · ‎11-12-2019

Thanks, Wingless! Will pull my old trim, take some measurements and call the trimlok folks. Their website indicates a 250 ft minimum purchase. Won't need that much, but maybe can share with others wanting to change trim.

wingless · ‎11-12-2019

You're welcome.

If the replacement doesn't need to have a silver or a gold half round bead, then there are lots of black edge guard strips available, in a range of thicknesses and lengths, like in this link.

https://www.amazon.com/WINUNITE-Guards-Universal-Rubber-Protection/dp/B07FTFKB4G?pf_rd_p=dd4f5b57-ba5b-418b-a348-64ec62df14cc&pd_rd_wg=2UFNC&pf_rd_r=HZX6SCJ625BKX2N0NA30&ref_=pd_gw_cr_simh&pd_rd_w=2IeKR&pd_rd_r=04c25c24-9389-42cd-a689-251e008fbc9c

CRJ1 · ‎11-13-2019

Thanks, again. Not sure I like the look of the silver or gold bead anyway. Will post the final decision and results.

satisfied · ‎11-18-2019

I will split the roll of the chrome...PM me

Kennyg · ‎12-08-2019

Your trim should be Teak. If not call Boat Outfitters 866-633-7961.

wingless · ‎12-08-2019

The factory built these boats w/ gold edge trim at the salon door, very similar to the part shown in this link, not teak.

https://www.trimlok.com/plastic-extrusion/edge-trim/decorative-trim

Chris-380 · ‎12-22-2019

I would like to get in on splitting the 250’ roll if you ordered it

CRJ1 · ‎12-26-2019

Chris - 380 -- have not ordered anything yet. Will let you know when I get in touch with Trimlock folks.

Chris-380 · ‎12-26-2019

Thank you CRJ!

satisfied · ‎01-17-2020

Anyone get a sample out of trim-lok ? I requested twice..

CRJ1 · ‎01-18-2020

I too have requested samples - never received. I called and talked to customer service representative and she asked for photos, which I sent. Have tried to call her again to follow up and always goes to VM. Left repeated messages with no response received. Just about ready to give up on trim-lok.

satisfied · ‎01-26-2020

I've finally got a sample of the chrome Trim Lok! It looks real close to the original (just a little less leg length, maybe an 1/8") I'm probally going to bite the bullet and order a roll.. I can cut up my sample and send it to anyone who's interested

Chris-380 · ‎01-26-2020

Awesome!

CRJ1 · ‎01-26-2020

satisfied - That is great news. I am interested and would appreciate taking a look at the sample, if you can send it. Would be willing to share the cost of the purchase, also.

Chris-380 · ‎01-26-2020

Satisfied, I am in on the chrome. I have another 380 owner that also wants in, I have a third buddy that hasn’t responded yet. I believe he will want in also

If CRJ wants in still, that would give us 5 people with 50’ each.... not sure in the initial shipping cost or to sub ship it though

CRJ1 · ‎02-24-2020

Finally got a chance to install the new trim - see link. Many thanks to Satisfied for taking the lead and distributing the trim. It is a big improvement! https://www.dropbox.com/s/27phngd6gygkvnb/new.jpg?dl=0

Chris-380 · ‎02-24-2020

That looks great

satisfied · ‎02-24-2020

Awesome! Make me want to go out and get mine installed!

Sea Ray

Looking for the trim around the cockpit sliding door on my 2001 380 DA.