Sea Ray

I agree with Captain Rick. I have a 96 Sedan Bridge and had a local canvas shop do it. Great job and fit.

I agree with both other comments. Over the years I have had numerous canvas replacements. I have a 1995 250 Sundancer and the local canvas maker did an excellent job and was cheaper. They are also close in case anything is not correct or a snap needs replacement.

I concur I use local for everything. These folks have to make a living too.

Two of the three local shops I contacted have gotten back to me. One gave me a price but it was nearly what I paid for the boat. I am still waiting for the pricing from the second shop.

That's a problem with older boats. You have to look at the intrinsic value not just the dollars. Local fabrication is the best approach especially if the boat has never had an enclosure.

I have one more comment. My previous boat was a 27' and I went to Ann's Canvas Shop here in the Grand Rapids,Mi area. Now I don't know how much you paid for your boat, but it only cost me $1,500 to have a complete re-do including the plastic windows, zippers etc.... It was worth every nickel and when I went to re-sell the boat it was a money well spent. What I'm trying to say is: Don't go on the cheap, go for quality. 🙂

First let me say thanks for the responses. I appreciate all of the help and insight that I can get.
The pricing from both Great Lakes Boat Tops and Harvard Marine were very close to each for the complete package (including frames). Harvard Marine does have the original templates for my particular boat (AZ) whereas GLBT has the templates for the TN made version. I was mostly curious as to if anyone had any experience with Harvard Marine. I've spoken to him on the phone and my only concern is that he is really not much of an email person and prefers to do everything over the phone. As with my work, I prefer email correspondence as it provides a detailed summary of everything that was discussed. This helps eliminate the "I never said that" scenario. I agree, that it would be a better option to go local as they can get their measurements directly from "our" boat but that will obviously depend on cost. I do not want to go cheap (I don't believe that either HM or GLBT fall into that category) but I also can't justify paying 2 to 3 times the cost on our particular boat.

The biggest issue with mail order canvas and especially enclosures is the fit and finish. You can really screw things up trying to get the ribs set to provide the right tight finish. But good luck.

That's why I'm hoping that one of the local shops will come back with a price that I feel comfortable with.