HELLO, I am new to group. I want to replace blu light toggle on 2006 sea ray 240 sundeck part number 1757312. Are there any how to videos or instructions on how to do this. I see they are removed from back of console. any hints?http://www.searay-par...
HiI'm trying to locate the bilge pump switch (Manual/Automatic/Off) switch in the engine compartment of my 2007 240 Sundancer. I can easily locate the pump, the float swich is inconviently placed under the engine (behind the pump), but every thing I ...
I recently purchased this boat and the oil checking stick is different than I've ever seen. Does anyone know where the oil level should show on the stick? The stick is more like a metal rope with an end that looks more like a bullet shell. I'm ass...
My Sea Ray is berthed in Lake Tahoe. Does anyone have a checklist for winterization of this vessel?
The hot water flow in my 2000 410 Sundancer is really slow, ever since I bought the boat 2 years ago. I've just replaced a leaking relief valve on the hot water tank and finally got the tank up to proper temperature, but hot water still comes out of...
We have a 27' Sundeck. The screws on the swim platform have loosened or have fallen out. Has anyone experienced this?
I have a 2016 SD 260. I can't get the boat to plane. At full throttle I get to about 3100-3200 rpm and only achieve 12-13mph.engine seems to be running fine.Anyone else having this issue and have any suggestions?Thanks in advance
Hi Everyone! Okay, so this is going to seem like a really stupid question, but here goes....Just purchased a Sea Ray Sundancer 270. First Sea Ray. So far it is awesome. But one issue. No fresh water for the head when I try to flush. Apparently, the b...
The port engine ignition alarm/buzzer is no longer working. Does anyone know where the buzzer is located, so I can check it to see if this is where the failure is at. The vessel is a 2000 340 sundancer, twin engine. Thanks
