Brunswick Community

I have a 2000, 340  Sundancer that has two small cabinets/lockers on the port side, aft deck. I need to remove the interior lining panels to gain access to the hull behind each. They are tightly fitted in the enclosure, and I cannot locate any screws...

 I have a 2000 340 Sundancer with the 7.4 Horizons. The bilge blower vents, deteriorated, so I am in the process of replacing them. There are four on each side. The starboard side is for exhausting the bilge fumes with hoses leading from  the port an...

Kudos to Don: The OxyClean removed the rust. I tried a variety of products to no avail. Here is what I did:  I used the OxyClean gel, following the directions of applying it and letting it sit for 5-10 minutes. Then with a Scotch Bright non scratch s...

Greetings Everyone:  Hopefully someone has a suggestion for removing a rust stain from one of the seats at the helm. I am not sure what the actual material is, other than describing it as vinyl.  It is the factory helm seat on a 2000 340.  Thanks

Spoke with Marinco:   The wiring for each battery must be installed as directed for the chargers longevity and  correctness for the design, regardless if they are in parallel. He explained their interpretation as to why connecting to each battery pos...