Sea Ray

Our 2006 205 Sport, used every week until 2015 and then sat uncovered with a seized engine in 12 to 50+ degrees centigrade for over 5 years... and along came COVID and I needed a project   

The refurb took place in our car port during April to September 2020, much of this time was spent waiting for spares as the logistics companies worked out how to move stuff out to the Middle East, but piece by piece in 40+ degrees, the work is now complete. Hope you like it - some details of what was done during the process. 

1. Rip it to pieces, removing all wood (all rotten), most of the electrics and pretty much everything else not permanently part of the hull!

2. Remake all of the woodwork with fully varnished marine ply (unlike the original cheap untreated ply) and re-cover/paint.

3. Complete engine rebuild, altering from 5.0 Carburettor to 5.7 MPI and fit all new marine parts, together with a full transom overhaul. 

4. Re-upholster all seats and sun deck (also new wood) in new colour scheme.

5. Install separate electrical system for audio, LED lighting and dash ancillaries, together with 2 x 120AH batteries. Also upgraded alternator and additional 90AH running battery.

6. Install 4000W Rockford/Fusion/Kicker audio system

7. Remake all carpets and canvas.

8. Design and install wrap.

9.  Stand back and have a beer!

Main points I noticed in the whole process is that everything you can easily see on the boat is awesome quality, but most of what you can't see is not  Now it's all a consistently high quality  Had a lot of fun, stress and lost 10kg in the process, but totally worth the effort!