Sea Ray

buddydog · ‎01-23-2018

My boat is a 2002 460. A previous owner enlarged the opening for the cockpit radio/cd player. I have purchased a Clarion 660 to replace the Pioneer that is very broken. The hole is about an inch too large in height, so I need to find a suitable backing material to reframe the opening. Has anyone found a good solution?

wingless · ‎01-25-2018

Radio at the location shown in the image?

If so, then a panel, like is used for the instruments and for the switches could go on the exterior. A support panel could be placed on the interior, if required.

http://images0.boattrader.com/resize/1/64/58/4376458_20140923080200585_1_LARGE.jpg?t=1262507

buddydog · ‎01-25-2018

Good idea.....thanks. Are the instrument panel materials readily available?

wingless · ‎01-25-2018

There are many vendors that produce these parts.

This vendor has several large blank panels in-stock at a reasonable price.

https://www.searay-parts.com/Sea-Ray-instrument-panels-s/842.htm

buddydog · ‎02-27-2018

I have purchased the panel and it seems to be perfect. I only need to square the corners to get a perfect fit. Many thanks!

wingless · ‎02-27-2018

Great news!

Glad to help.

Use care when modifying the panel, it is thin and not terribly strong, so a crack at this point would be bad.

Post images if possible, thanks.

Sea Ray

My boat is a 2002 460. A previous...