I need to attach the depth sounder sending unit that goes into a round pocket under the engine in my 92 Sundancer 270. The depth sounder is the. original unit. Is it glued in or does it just sit therethanksstuart
I need to remove the port and starboard rear coaming pieces so that I can service and repair the engine vent hoses. How do you remove the coaming pieces? Are they glued on? I can't feel or see any fasteners behind them. Thanks for your help.Stuart in...
I need to remove the port and starboard rear coaming pieces so that I can service and repair the engine vent hoses. How do you remove the coaming pieces? Are they glued on? I can't feel or see any fasteners behind them. Thanks for your help.Stuart in...
I need to remove the port and starboard rear coaming pieces so that I can service and repair the engine vent hoses. How do you remove the coaming pieces? Are they glued on? I can't feel or see any fasteners behind them. Thanks for your help.Stuart in...
CSH, thank you very much for your help. That's what we had read. Our ice drawer is missing. Do you know what it is made of? Would you have any pictures? Frenchy, Thanks for the information. We're most appreciative!Stuart
The foam is for flotation. When replacing it make you have water drains along the inner keel as well as water passages thru any bulkheads. Some compartments also may have drains to the bilge. You want accumulated water to flow to the bilge pump or tr...
Most major cities have 1or2 power steering repair facilities go on line and try to locate one near you .. The pump n my mercruiser 454 is standard G.M.
I agree with wingless about using the set up manual, but I also suggest that you start by separating the outdrive from the steering system. Your problem may not be in the power steering components but may be in the hinge mechanism of the out drive....
Pjs is correct in using mercruiser recommended oils. The problem is the recommended oil is no longer available. So you need to determine if your engine uses a flat tappet cam or a roller tappet unit. The year of manufacture is right about the chang...
There was a change in the rear seat design at the 93-94 model change over. Please send or post a picture so the list can make sure we're on the same pageStuart
