Galley Exhaust Fan 1998 290 Sundancer No Power is going to the 2 wires (Yellow & Black) for the fan and the fan switch has metered good. I do not have access to wiring diagrams and there must be a blow fuse somewhere and I cannot find the fuse block or i

[wingless]

Here is the Owner's Manual for that boat.

https://bbg1.my.salesforce.com/sfc/p/#E0000000Z21E/a/E00000000UE2/hBUQiWPopWGUENEqQaZM9mDUGV8aXzzMxhnvU1HyCZQ

The blower switch is a power input to the blower module. That module monitors the blowers and illuminates the switch light only when all is good. Some is shown on page 20.

The Main DC panel has 6A over current protection breakers for each blower, shown on page 30. Are those breakers tripped?

[Herrickjde]

I assume you mean behind this panel attached picture and I will need to look and respond. Thank you for this response

[wingless]

The blower control module in my 2000 380DA is located behind the main breaker panel in the engine compartment.

[wingless]

Here is my blower control module.

https://live.staticflickr.com/65535/50094838507_2dac9b50bb_c.jpg

[Herrickjde]

Thanks